4 ways Tyre Maintenance can surprisingly increase your vehicle cost

Do you want to understand more about the importance of Tire Maintenance so that it does no harm to other vehicle parts? So, you got to the right post. Keep following the tips we have prepared below:

Many people are negligent about Maintaining the Tyres on their vehicles. They fail to calibrate, check irregularities, or even pay attention to what the tyre deserves, caring more about the amount of gasoline in the tank or with dirt in the vehicle. This lack of care has consequences that directly influence gasoline consumption, performance, safety, and vehicle life.

In this image how tyres increase your vehicle cost

The tyres and the aspect of road safety

Tyres are one of the main components in road safety, as they are the only element of the car that is in direct contact with the road. The vehicle’s adherence to the road depends entirely on the tyres’ condition, which may be the difference between safe and unsafe driving, jeopardizing your safety and that of those driving on the roads. For example, in case of rainy conditions, tyres can be decisive for not losing control of your car!

The effects of weather on tyre maintenance

It is essential to adjust the tyres to the vehicle and its type of driving, requiring regular maintenance. Adapting tyres to the type of driving conditions, summer, or winter tyres and more suitable for rain or ice, for example, can also make all the difference in driving. Investing in high quality tyres give greater durability. While cheaper tyres can have faster wear & tear needing quicker replacements. Remember that Tyres must be changed together for both sides of the axel. That is, the front tyres must be the same pairs and the ones behind you, too – always rotate them in pairs.

Saving the vehicle is important

A considerable number of drivers do not give due Importance to maintaining Tyres. But it must be borne in mind that this is one of the cares that can save vehicles the most from wear and tear. People end up leaving this maintenance before some trips, forgetting the routine tyre care. Thus, other parts of the car end up paying the price.

When it comes to tyres, recommendations are very welcome. After all, it is an item that deserves full attention to ensure comfort, safety, and durability.

What is the primary importance of maintaining tyres?

As tyres are the car parts that come into direct contact with the ground, they end up receiving the most significant impacts, thus suffering a lot of wear and tear over time. Therefore, tyre conditions directly influence the service life and performance of other parts of the vehicle, such as traction, suspension, and brakes. In addition, even fuel consumption changes.

The problem is that few people realize that by taking certain simple precautions with the maintenance of these items including tyres, it is possible to prolong their use and reduce wear and tear on other parts, ensuring safety and comfort for much longer.

Tyres can help save fuel

If the car runs with 30 PSI (tyre pressure) and you leave with 20% less, you may not even notice it in the city, but it makes a massive difference on the highway. Tyres with low pressure give rolling resistance & lose their fuel savings. Also, low pressure tyres lose their useful life of upto 30% as well as their safety.

Proper calibration is important for tyre stability

Manufacturers build tyres to a predefined parameters for quality & safety. When maintaining tyres, you should calibrate the tyre pressure as recommended by the manufacturer. Adequate depth of grooves, the right alignments & balance of wheels are equally important. They directly affect the stability, comfort, braking and safety of your vehicle.

Safety should be the concern

Checking the condition of your tyres regularly is a necessity, as it is not only your safety that is at stake but also that of others. The ideal is to inspect them monthly, depending on their use. Tyres that spend longer time in contact with uneven roads or gravel for long distances, the checks need to be more frequent. Always check the condition of your tyres before travelling. Noticing some irregularity beforehand is not only easier, but it can prevent much more significant problems, sometimes even irreversible.

Some of the points to consider in tyre maintenance are:

  1. Higher than recommended pressure causes only the central section of the tyre to touch the tread.
  2. Lower pressure than indicated causes the sides of the tyre to sag and the central part of the tread to lose contact with the tread.
  3. Wear on a tyre rim may come up.
  4. The wheels may be misaligned.
  5. Irregular wear may take place. It indicates that the wheels are not in balance or may be the shock absorbers need replacement.
  6. Signs of Driving Problems with Unusual Noise, Vibration or Hit May indicate a separated radial belt, unbalanced wheel, or poorly fitted tyre.
  7. Steering Wheel Pulls to One Side. It may indicate pressure difference between tyres, separate radial belt, or wheel misalignment.

Tyre Calibration & its role in maintenance

Tyre calibration is easy and affordable. Any gas station offers a calibration pump. Check your tyre pressure weekly, always following your vehicle manufacturer’s recommendations. It is important to note that these checks are for cold tyres. As Manufacturer’s recommendation are based on cold tyres. For Hot tyres, pressure can vary, resulting in difference up to 5 PSI (pounds). The manufacturer recommendation are usually there on the driver’s door column, inside the glove compartment or in the tyre manufacturer’s manual. It may seem like an exaggeration, but maintaining pressure is especially important. Several factors can cause pressure loss, such as punctures, a nail left in the puncture, a valve that does not work correctly, a dented wheel, etc. This compromises the performance of the tyre.

Always obey the maximum tyre pressure indicated. If you are driving with the vehicle loaded, add 2 to 4 PSI. Watch out if your tyre loses a lot of psi a month. Under normal conditions, a tyre can lose up to 1 psi per month. Exceeding that can mean problems or punctures in the tyre.

There are tyre maintenance procedures that only trained professionals should do because they have the appropriate tools and knowledge. However, understanding the reasons and processes at the time of maintenance facilitates learning, helps in maintenance, and prevents adversity.

When do you need to change tyres?

It must be made clear that there is no specific time for changing the tyres. But the maintenance and assessment of the condition of the equipment must be constant, considering the purpose of the vehicle. Routine maintenance will increase the durability of the parts. Not to mention, of course, that the tyres themselves give clear signs that the time has come to make the change.

The first sign that the time has come to buy new tyres is when the wear indicator bars (TWI), which are between the rubber grooves, are on the same level as the tread. It is the famous bald tyre that many know. When the tyres reach that state, it is a considerable risk to keep running with them.

Also, remembering that the appearance of bubbles in the tyres and small wires, which appear with the wear of the rubber, are also warning signs, as they indicate that the change must be made as soon as possible.

What are the main mistakes in tyre maintenance?

See below, what are the main mistakes in tyre maintenance to avoid committing them!

Trying to save on tyre purchase and maintenance.

As tyres are essential parts for your safety, it is not interesting to save costs on this part of the vehicle. Buying tyres of dubious quality and failing to Perform Corrective Maintenance generates unnecessary expenses with items that have little durability.

In other words, what you end up with is a loss rather than savings. Know that tyres in bad conditions end up affecting the car’s stability, which can lead to loss of control and serious accidents.

The correct functioning of parts of your vehicle, such as bearings, axles, suspension, and brakes, depends on the conservation and use of the tyres. Therefore, Checking the Status of these Items should be done constantly, and not just when they need repair.

Scratch the tyres

Speaking of economics, crimping, or scratching the tyre is another procedure that many drivers end up doing when they don’t want to invest in safety. It is a practice where the grooves are redrawn on the rubber, which is already worn out.

This is a procedure condemned by specialists, as it compromises the tyre’s structure, often leaving the canvas visible. In such cases, there is a high probability that the tyre will burst. The tyre that is heavily worn should be replaced as soon as possible.

Wait for the tyre to go “bald” before changing.

The tyre can be considered worn, smooth, or “bald” when its grooves are less than 6 mm deep. It is not for nothing that driving with a tyre like this is considered a serious infraction. In this state, the tyre can burst quickly, stay with less effective braking, in addition to skidding more (especially in curves). In the rain, the risk of entering a skid is extremely high, losing total control over the vehicle’s direction.

If you want to about our GPS Tracking Products & Services please visit our website.

Leave a reply:

Show Buttons
Hide Buttons
Skip to toolbar Log Out